Heavy Plate Steel Cut to length line(KJH25)

Categories: Cut To Length Line
Brand:kingjime
Model:Cut to length line(KJH25)
Port:Shenzhen
Terms of Payment:L/C,T/T
Comments:KJH25 series heavy gauge steel Cut To Length Lines can do uncoiling, leveling, measuring, cross-cutting to length and stacking.

I.Technical Data for KJH25 series

KJH25 series heavy plate steel cut to length line

  Model       Sheet Thickness（mm） Coil Width(mm) Leveling Accuracy Tolerance Line Speed(m/min) Coil Weight(t)

（mm/㎡) (mm/m)

KJH25-20*2000 6-20 400-2000 2.5 ±1.0 25 20、30、40

KJH25-20*2200 6-20 400-2200 2.5 ±1.0 25 20、30、40

KJH25-20*2500 6-20 500-2500 2.5 ±1.0 25 20、30、40

KJH25-25*2000 8-25 400-2000 2.5 ±1.0 25 20、30、40

KJH25-25*2200 8-25 500-2200 2.5 ±1.0 25 20、30、40

KJH25-25*2500 8-25 600-2500 2.5 ±1.0 25 20、30、40

II. General Introduction of cut to length line

KJH25 series heavy gauge steel Cut To Length Lines can do uncoiling, leveling, measuring, cross-cutting to length and stacking work. It mainly includes uncoiler, leveler, measuring encoder, shearer, conveyor, stacker, hydraulic system, pneumatic system and electrical system, etc., the line can make sure of accurate feeding and shearing.

It can be widely used in cold or hot rolling carbon steel, tinplate, stainless steel and all the other kinds of metal materials with surface coating.

Cut to length line is controlled byPLC system. It has PLC controlled the length measurement. The information of length, shearing numbers and speed can be input to the PLC systems. When the need shearing number is reached the line can stop automatically. The line speed can be adjusted, It has a encoder with high precision, and whole line can work automatically and operate easily, smooth sheet can be made.

III. LIST OF EQUIPMENTS UNDER SCOPE OF SUPPLY:

1.      Coil car

2.      Double Cone Decoiler

3.      Snubber Arm.

4.      entry support peeler table

5.      straighener

6.      roller table

7.      Side Guide Roller

8.      The leveler

9.      end plate run out pinch roll

10. Hydraulic Shearing Machine

11. stacking table

12. Hydraulic Systems

13. Pneumatic Systems

14. Electrical System PLC Control

KeyWords:Stainless Steel Cut To Length Line ,Cut To Length line Machine ,Low Speed Cut To Length Line ,High Speed Cut To Length Line ,Hot Roll Cut To Length Line ,Coil Cut To Length Line ,Steel Cut to Length ,Slitting And Cut To Length Line ,Stainless Steel Cut To Length Machine ,Automatic Cut to Length Line ,Cut to Length Lines ,Cut To Length Machine

Thin Steel Cut to length line(KJH20)

• Categories:
• Cut To Length Line

• Brand:
• kingjime

• Model:
• Cut to length line(KJH20)

• Port:
• Shenzhen

• Terms of Payment:
• L/C,T/T

• Comments:
• KJH20 serise without loop pit Cut To Length Lines can do uncoiling, leveling, measuring, cross-cutting to length and stacking..
• I.Technical Data for KJH20 series

  KJH20 series without loop pit,the thin steel low speed cut to length line
  Model	Sheet Thickness（mm）	Coil Width(mm)	校平精度	定尺公差	Line Speed(m/min)	Coil Weight(t)
  			（mm/㎡)	(mm/m)
  KJH20-2*400	0.3-2	150-400	2	±0.5	20	3、5
  KJH20-2*600	0.3-2	150-600	2	±0.5	20	3、5
  KJH20-2*800	0.3-2	300-800	2	±0.5	20	5、10
  KJH20-2*1000	0.3-2	300-1000	2	±0.5	20	5、10
  KJH20-2*1300	0.3-2	300-1300	2	±0.5	20	5、10、15
  KJH20-3*400	0.4-3.2	150-400	2	±0.5	20	3、5
  KJH20-3*600	0.4-3.2	150-600	2	±0.5	20	3、5
  KJH20-3*800	0.4-3.2	300-800	2	±0.5	20	5、10
  KJH20-3*1000	0.4-3.2	300-1000	2	±0.5	20	5、10
  KJH20-3*1300	0.4-3.2	300-1300	2	±0.5	20	5、10、15
  KJH20-4*600	0.5-4.5	150-600	2	±0.5	20	3、5
  KJH20-4*800	0.5-4.5	300-800	2	±0.5	20	5、10
  KJH20-4*1000	0.5-4.5	300-1000	2	±0.5	20	5、10
  KJH20-4*1300	0.5-4.5	300-1300	2	±0.5	20	5、10、15
  KJH20-6*600	0.6-6	150-600	2	±0.5	20	3、5
  KJH20-6*800	0.6-6	300-800	2	±0.5	20	5、10
  KJH20-6*1000	0.6-6	300-1000	2	±0.5	20	5、10
  KJH20-6*1300	0.6-6	300-1300	2	±0.5	20	5、10、15
  KJH20-6*1600	0.6-6	300-1600	2	±0.5	20	5、10、15

  
  

  II. General Introduction of cut to length line

  
  

  The without loop pit Cut To Length Lines can do uncoiling, leveling, measuring, cross-cutting to length and stacking work. It mainly includes uncoiler, leveler, measuring encoder, shearer, conveyor, stacker, hydraulic system, pneumatic system and electrical system, etc., the line can make sure of accurate feeding and shearing. It can be widely used in cold or hot rolling carbon steel, tinplate, stainless steel and all the other kinds of metal materials with surface coating.

  Cut to length line is controlled byPLC system. It has PLC controlled the length measurement. The information of length, shearing numbers and speed can be input to the PLC systems. When the need shearing number is reached the line can stop automatically. The line speed can be adjusted, It has a encoder with high precision, and whole line can work automatically and operate easily, smooth sheet can be made.

  
  

  III. LIST OF EQUIPMENTS UNDER SCOPE OF SUPPLY:

  1.      Coil car

  2.      Double Cone Decoiler

  3.      Snubber Arm.

  4.      entry support peeler table

  5.      straighener

  6.      roller table

  7.      Side Guide Roller

  8.      The leveler

  9.      end plate run out pinch roll

  10. Hydraulic Shearing Machine

  11. stacking table

  12. Hydraulic Systems

  13. Pneumatic Systems

  14. Electrical System PLC Control

  
  

  KeyWords:

  Stainless Steel Cut To Length Line ,Cut To Length line Machine ,Low Speed Cut To Length Line ,HighSpeed Cut To Length Line ,Hot Roll Cut To Length Line ,Coil Cut To Length Line ,Steel Cut to Length,Slitting And Cut To Length Line ,Stainless Steel Cut To Length Machine ,Automatic Cut to Length Line,Cut to Length Lines ,Cut To Length Machine

Metal Slitting Line(0.5-3mm thick)

• Categories:
• Slitting Line

• Brand:
• kingjime

• Model:
• Slitting line(0.5-3mm thick)

• Comments:
• Slitting line machine not only for the steel serivice cutting industry, but also for the pipe industry.
• 

    

  I. Technical Data

  Model No.	Coil thick (mm)	Coil width (mm)	No. of slits	Tolerance (mm)	Speed (m/min)	Coil weight
  KJS-3X550	0.5-3mm	100-500	30-6	+/-0.1	60	5tons
  KJS-3X850	0.5-3mm	100-800	30-6	+/-0.1	60	5tons
  KJS-3X1300	0.5-3mm	500-1250	30-15	+/-0.1	50-120	15tons
  KJS-3X1600	0.5-3mm	500-1600	30-15	+/-0.1	50-120	15tons
  KJS-3X2000	0.5-3mm	500-2000	30-15	+/-0.1	50-120	20tons

  II. Introduction of the slitting line

  Slitting line machine not only for the steel serivice cutting industry, but also for the pipe industry. A lot of customers make the pipes before slitting the large coil to the small size of coils.  

  Slitting line can do uncoiling, slitting and recoiling works, make coil steel to any needed width coil steel. It mainly includes coil car, uncoiler, coil guide, slitting machine, scrap winder, tension unit, recoiler and coil car, hydraulic system, Etc. It mainly used in coil or hot rolling carbon steel, silicon steel and all the other kinds of metal materials with surface spreading.

  This line can be adjusted to do recoiling or dividing work to meet customer’s demand.

  III. Machine parts in the working line

  1.        coil car

  2.        decoiler   

  3.        peeler entry table

  4.        Straightener.

  5.        Shearing machine   

  6.        loop table                                                

  7.        coil guide and pinch roll                    

  8.        Slitting machine

  9.        scrap winder (both sides)

  10.    Loop table

  11.    separator and tension table

  12.    Deflector roll and exit threading table

  13.    Recoiler

  14.    Over arm separator in the recoiler.

  15.    Exit coil car for recoiler

  16.    Hydraulic system

  17.    pneumatic system

  18.    electrical control system
  
  KeyWords:
  

  Metal Slitting Line ,Metal Sheet Slitting Line ,Slitting Line ,Electrical Steel Slitting Line ,Steel Slitting Line ,Slitting Line machine ,Silicon Steel Slitting Line ,Steel Sheet Slitting Line ,Coil Slitting Line ,SheetSlitting Line ,Silicon Steel Sheet Slitting Line ,Slitting And Cut To Length Line